返回 产品详情
首页> 产品> 电工电气> 配电输电设备>
Hawke铠装防爆格兰（501/453/RAC系列）
来自上海颐品自动化科技有限公司
¥面议元/
发布时间  2025-12-29 关注次数  202
上海颐品自动化科技有限公司
家家通 2年
进入店铺 店铺留言
商家供应
图文介绍 产品参数 供应商信息
品牌Hawke

Hawke铠装防爆格兰密封接头（501/453/RAC系列）

 

HAWKE 501/453/RAC CABLE GLANDS
HAWKE铠装防爆格兰（501/453/RAC CABLE GLANDS）      

Hawke 501/453/RAC Cable Glands

Hazardous Area Cable Glands from Hawke

      Hawke铠装防爆格兰（501/453/Rac系列 Hawke Cable Gland）

 

Hazardous Area Cable Glands-ATEX IECEX，Exe，Exd Group II

Hawke防爆格兰代理商：上海颐品自动化科技有限公司（4008552521）

关键词：Hawke防爆格兰，Hawke防爆变径，Hawke防爆堵头，Hawke防爆呼吸阀，Hawke防爆接线盒，Hawke防爆控制箱

Hawke防爆格兰等产品规格书及相关证书-请咨询上海颐品自动化科技有限公司

 

Hawke 501/453/RAC cable glands are suitable for use with single wire armour ‘W’, wire braid ‘X’ ａnd steel tape armour ‘Z’ elastomer ａnd plastic insulated cables.

Hawke 501/453/RAC cable glands are dual certified Exd ａnd Exe ａnd suitable for installation in Zone 1, Zone 2, Zone 21, Zone 22 ａnd in Gas Groups IIA, IIB ａnd IIC, 3.2-91.6mm outside cable diameters.

When used in increased safety applications the Hawke cable gland can be used to terminate braided cables where the braid ａnd the cable outer sheath enter into the electrical enclosure or junction box.

♦ Exdb IIC Gb, Exeb IIC Gb, Extb IIIC, Db Aromoured Cables ATEX & IECEx Cable Gland.

Hawke 501/453/RAC cable gland is suitable for cable termination ａnd installation in Zone 1 (21), Zone 2 (22) ａnd Division 2 hazardous areas.

  • Flameproof AExd IIC Gb,
  • Increased Safety AExe IIC Gb
  • Dust AExtD Zone 21
  • Dual Certified Cable Gland For Hazardous Areas ATEX – IECEx

HAWKE 501/453/RAC CABLE GLAND TECHNICAL SPECIFICATION

  1. Hazardous Area Cable Gland Classification – Exdb IIC Gb, Exeb IIC Gb, Extb IIIC Db
  2. Certificate No’s  – baseefa06ATEX0056X ａnd IECEx BAS 06.0013X
  3. Cable Gland Zone Location – Zone 1, Zone 2, Zone 21, Zone 22 ａnd in Gas Groups IIA, IIB ａnd IIC
  4. Construction ａnd Test Standards – IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 ａnd IEC/EN 60079-31
  5. Ingress Protection – IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 ａnd NEMA 4X
  6. Deluge Protection – DTS01
  7. Operating Temperature Range  -60°C to +100°C

CABLE GLAND SELECtION TABLE FOR HAWKE 501/453/RAC

Hawke Size
Ref.		 Entry Thread Size Thread Length
‘H’		 Cable Acceptance Details ‘G’ Comp
ressed Length		 Hexagon Dimensions
Inner Sheath ‘A’ Outer Sheath ‘B’ ‘C’ Armour/Braid
Standard Seal Alternative Seal (S)
Metric NPT *
Standard Option Min. Max. Min. Max. Min. Max. Orienta
tion 1		 Orienta
tion 2		 Across Flats Across Corners
Os M20 ‡ ½” – 15 3.0 8.0 – – 5.5 12.0 0.8 / 1.25 0 / 0.8 52.0 24.0 26.5
O M20 ‡ ½” – 15 6.5 11.9 – – 9.5 16.0 0.8 / 1.25 0 / 0.8 52.0 24.0 26.5
A M20 ¾” ½” 15 10.0 14.3 9.0 13.4 12.5 20.5 0.8 / 1.25 0 / 0.8 53.0 30.0 32.5
B M25 1″ ¾” 15 13.0 20.2 9.5 15.4 16.9 26.0 1.25 / 1.6 0 / 0.7 59.5 36.0 39.5
C M32 1¼” 1″ 15 19.5 26.5 15.5 21.2 22.0 33.0 1.6 / 2.0 0 / 0.7 64.0 46.0 50.5
C2 M40 1½” 1¼” 15 25.0 32.5 22.0 28.0 28.0 41.0 1.6 / 2.0 0 / 0.7 68.3 55.0 60.6
D M50 2″ 1½” 15 31.5 44.4/42.3 † 27.5 34.8 36.0 52.6 1.8 / 2.5 0 / 1.0 79.0 65.0 70.8
E M63 2½” 2″ 15 42.5 56.3/54.3 † 39.0 46.5 46.0 65.3 1.8 / 2.5 0 / 1.0 78.4 80.0 88.0
F M75 3″ 2½” 15 54.5 68.2/65.3 † 49.5 58.3 57.0 78.0 1.8 / 2.5 0 / 1.0 83.7 95.0 104.0
G M80 3½” – 20 67.0 73.0 – – 75.0 89.5 2.0 / 3.5 0 / 1.0 95.6 106.4 115.0
H M90 3½” – 20 67.0 77.6 – – 75.0 89.5 2.0 / 3.5 0 / 1.0 95.6 115.0 130.0
J M100 4″ – 20 77.0 91.6 – – 88.0 104.5 2.5 / 4.0 0 / 1.0 95.6 127.0 142.0

All dimensions in millimetres (except*).
Os – F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands ａnd above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering.
† Smaller value is applicable when selecting reduced NPT entry option.
Sizes Os ａnd O are available with an M16 thread size. For O size with an M16 thread, the maximum cable inner sheath diameter is 10.9mm.

CABLE GLAND MATERIAL & FINISH

Hawke 501/453/RAC cable glands are manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

PREPARING CABLE & GLAND FOR INSTALLING HAWKE 501/453/RAC

Hawke 501 453 RAC Cable & Gland Preparation

CABLE PREPARATION

Strip Cable to suit equipment as shown above ａnd expose the armour/braid ‘I’.

‘I’ = 20mm for cable gland sizes Os to C ‘I’ = 25mm for cable gland sizes C2 to F ‘II’ = to suit equipment. If required, fit shroud.

CABLE GLAND PREPARATION

Push the cable through the armour spigot (4). Spread armour/braid over the armour spigot (4) until the end of the armour/braid is up against the shoulder of the armour cone. Position the armour clamping ring (3).

Remove the inner seal (5) from the entry (6). Place the entry (6) over the armour spigot (4). Move the sub-assembly (1) ａnd (2) up to meet the entry (6). Note: If the equipment has a threaded entry, it may be advisable to screw the entry component into the equipment to prevent twisting of the cable after step D

 

Hawke Cable Glands to view the complete range of hazardous area glands certified according to ATEX & IECEx for Zone 1 / Zone 2.

 

Flameproof Exdb ａnd Increased Safety Exeb (Dust Extb) Dual Certified glands from Hawke include – for further inbation review the product pages or contact us to discuss your cable gland requirements.

  • 501/421 Cable Gland Unarmoured   – outer cable sheath cable sealing
  • 501/423 Cable Gland Unarmoured – flameproof seal to inner/outer cable sheath with IP seal on the outer sheath
  • 501/453 Universal Cable Gland Wire Armoured Baided Steel Tape Armoured – indoor/outdoor hazardous areas
  • ICG 623 Barrier Gland Unarmoured – Zone 1, Zone 2, Zone 21, Zone 22 ａnd in Gas Groups IIA, IIB ａnd IIC hazardous areas
  • ICG 653 Barrier Gland Armoured – Zone 1, Zone 2, Zone 21, Zone 22 ａnd in Gas Groups IIA, IIB ａnd IIC hazardous areas
      Hawke铠装防爆格兰（501/453/Rac系列 Hawke Cable Gland）

Hazardous Area Cable Glands-ATEX IECEX，Exe，Exd Group II

Hawke防爆格兰代理商：上海颐品自动化科技有限公司（4008552521）

关键词：Hawke防爆格兰，Hawke防爆变径，Hawke防爆堵头，Hawke防爆呼吸阀，Hawke防爆接线盒，Hawke防爆控制箱

Hawke防爆格兰等产品规格书及相关证书-请咨询上海颐品自动化科技有限公司

 

上海颐品自动化科技有限公司
  • 公司类型私营有限责任公司
  • 经营模式生产加工-私营有限责任公司
  • 联系人张凯文
  • 联系手机13818772521
  • 联系固话021-60486851
  • 公司地址上海市金山区山阳镇浦卫公路16393号5幢346室
主营业务
CMP/CCG/Hawke/Eaton防爆格兰，REIKU尼龙软管及接头
上海颐品自动化科技有限公司（EPIN AUTOMATION）是一家集生产，销售，进出口加工为一体的股份制合作企业。公司主要生产加工黄铜镀镍电缆接头和尼龙电缆接头以及附件，金属软管和管接头，尼龙波纹管和管接头，PVC走线槽，ABS和PC电气接线盒，电气控制柜，尼龙扎带，号码管，接线端子，绝缘套管和热缩套管以及橡胶密封件等电工电气配线器材。另外，还代理和分销欧洲进口的知名电气品牌产品，部分产品通过RoHS，CE，UL，CSA，TUV，VDE，ATEX等认证。 公司拥有一支积极进取，技术精良的设计和销售团队，并与国内外多家知名机电生产厂商建立了长期友好的合作关系，销售国内外知名品牌电缆保护产品和其他机电产品。为其产品在中国区的市场推广、技术支持、产品销售、售后跟踪等提供专业周到的服务，为客户节约了大量的生产时间和制造成本。 客户至上，诚信为本，为客户创造价值是我司的经营宗旨，我们将以专业的技术支持，快速的产品供应，完善的售后服务，竭诚为工业自动化、机械制造，电子通信、电力电气、铁路机车，仪器仪表，航空船舶，港口设备，石油石化等领域的客户提供高质量的产品和服务。另外，公司也承接工业自动控制和电气工程项目设计和集成，欢迎新老客户咨询洽谈。 目前，我公司代理和经销的主要电气品牌有以下产品： 1、电缆接头系列：Eaton，Hawke，CMP，Peppers，CCG，OSCG，Wiska，Pflitsch等； 2、尼龙软管系列：Interflex，PMA，REIKU，Flexicon，Adaptaflex，Kopex等； 3、金属软管系列：Anamet，Teaflex，Interflex，Adaptaflex，Anaconda等； 4、PVC线槽系列：SES，KSS，Panduit，Unex，Pflitsch，HAWA等； 5、电气接线盒等：Rittal，Hibox，Fibox，Boxco，E-tan，HAWA等； 6、扎带号码管等：EPIN，AVC，KSS，SES，Panduit，Richco等；
同类产品

Copyright 2011 jdzj.com All Rights Reserved ICP备案号:浙B2-20080178-1

张凯文 电话咨询 立即询价